The telecom service providers use Fiber Optic Cable to spread their connection to other clients. The main reason of using this new generation data transferring cable is its performance. Once you install the fiber optic connection there is a very less chance that the connection needs a change. The thin fibers which act as the light carrier carry the signal or data at the speed of light which means an established connection with the high data interchange rate. Optical Fiber Installation Agencies use many expensive equipments like hydraulic power pack, different tools for twisting and cutting the fiber cable, Cable Blowing Machines to pull the connection under the ground etc.
Whether it’s a highway or ground optical fibre installation has to be done by digging under a certain depth. At first a whole plastic channelis established in the installation route. Then the original fiber cables are passed through the channel so that the connection becomes extremely secured. Mainly to run the blowing machine, there is need of constant power supply to keep pulling the cable under the ground. While doing this the operators have to be extremely careful with the use of optical accessories like battery, cutter and other tools.
To install a fiber optic cable connection the air blowing machine plays the vital role. It is also sometimes called as a Cable Jet Machineting machine, this hydraulic machine has the emergency stop button to stop the cable blowing operation anytime. The main function is to push the cable within the duct by blowing air pressure constantly. optical fibre installation