Cable and duct Lubrication Oil
Fiber optic cables and other cables lubrication oil.
- Package 1lt and 60lt
– Protect your cables
– More blowing distance
– Easy and fast blowing process. Save your power and money
You can find consuption table below;
The process of fiber optic blowing while establishing a network is not very complex when you are using Fibre optic cable blowing machine. This machine is the ultimate and the latest technology used for telecommunication installation purposes. The operators who handle the machine have to have enough knowledge of using several stages of using the blowing machine. The machine works on the fuel engine which constantly supply the power to the air hydraulic system. There are several valves involved in controlling the fuel into the blower. The control shaft controls the speed of air pressure and let the fiber optic pass through the duct.
Also you need to put lubrication oil for fast blowing. This is the best way for the cable blowing process. If there is no friction, will be better results. So lubrication oil is important. But it’s not must…
This powerful machine lets you complete installation of Fiber Optic Cable in a network very efficiently. You can use this machine to make a flexible connection in a complex networking area. The cable blowing machine price is a little higher, but as return you can complete the whole networking very easily with less manual labor and cost. You can also move this hydraulic air blowing machine from one place to another very easily as it is assembled on four wheels.
The process of operating the air blowing machine is very comfortable with less effort. The machine has the inbuilt air motors which needs to be turned on before placing the cable into the blowing machine. Fibre optic cable blowing machine has the functionality which can be controlled manually. You can measure the air pressure reading on the meter and control the air pressure depending on the need of installation.